Samsung G935F Combination File U5

Samsung G935F Combination File U5

Samsung G935F Combination File U5

Samsung G935F Combination File U5


All Firmware Samsung For All Series

COMBINATION G-SERIES

SAMSUNG_COMBINATION Product SW KNOX Product SW


Combination File

combination file is a developer firmware by which we can test mobile device hardware. It can also be used to remove FRP account. Samsung combination is a factory file, also called a factory binary file.

Member

  1. First, download the FRP Hijacker by Haggard V1.0
  2. Now install the FRP Hijacker after successfully install the FRP Hijacker
  3. Open FRP Hijacker you will see the SAM TOOLS tab click on it
  4. You will see the Create ADB Enabled File
  5. Choose the Stock file in the file tab
  6. Click on create a file it will take around 5 minutes to create combination file
  7. After finish the process you will the see a zip file in the same folder.
  8. Use latest Odin to flash this file
  9. In case this file bricked the Samsung device flash the stock file.

All the following Samsung Combination File (zip file) contains original Samsung USB Driver, Flash Tool and the Combination File.
...
Download Samsung Combination File for all Models.

Samsung COMBINATION A-SERIESS

Samsung COMBINATION C-SERIES

Samsung COMBINATION FILE E-SERIES

COMBINATION FILE G-SERIES

 

 

  1. 1.1. Download Samsung Firmware.
  2. 1.2. Create Samsung Combination File.
  3. 1.3. Reset Samsung Device and Enable USB Debugging.
  4. 1.4. Flash Samsung Combination File with Odin.
  5. 1.5. Please get the approval to use factory binary (PIT)

You need to check PDA version to check compatibility combination file on samsung device go to settings-> about pone-> software information-> baseband version.

If you have the doubts, then do remove the Google account before factory resetting it. No Google account means no FRP because in the absence of an existing account, it cannot ask you to login to an account which was used prior to the reset. Lastly, rooting or unrooting doesn't do anything to the FRP.

  1. Install the latest Samsung USB Drivers. ...
  2. Download Samsung Odin flashing software / Professional flash tool. ...
  3. Extract the Combination files to your PC using Winrar or 7zip. ...
  4. Put your Samsung device into Download / Odin Mode. ...
  5. Launch Odin Flash tool/Flashing software.

Steps to remove FRP Lock with Tenorshare 4uKey for Android

Connect your phone, and from this first screen, select the “Remove Google Lock (FRP)” option. Before you proceed, ensure that your phone's battery is charged up to at least 50%. Keep the device connected throughout this process.

Removing FRP on Samsung with Combination File
Many people think that they will bypass or remove the FRP lock on Samsung Galaxy just by installing the stock firmware via Odin. I remember doing an equivalent to repair the firmware reset protection on a friend’s Galaxy S7 Edge. the reality is, you can’t remove FRP lock Google account issue on Samsung mobiles with a traditional firmware flash.

Below, I’ll be describing the tactic to flash combination firmware on Samsung devices to get rid of the FRP lock.
1. Download Samsung Firmware
Since we’ll be employing a combination of specific firmware binary components, you’ll got to download the newest Samsung firmware for your Galaxy device. you’ll grab or get the firmware file for your device model from any of the sources mentioned below.
2. Create Samsung Combination File
Okay, now that you simply have downloaded the right firmware for your Samsung Galaxy phone or Tab, it’s time to make the mixture firmware to get rid of the FRP lock on your Samsung device.

Samsung G935F Combination File U5

Follow the steps given below to make a mixture firmware from the regular firmware files.

  1. Extract the downloaded Samsung firmware Zip file. you’ll use a zipper archiver like WinRar, 7Zip, PowerArchiver, etc. for the aim .
  2. Open the extracted folder and you’ll find 5 firmware binaries including AP, BL, CP, CSC, and Home_CSC.
  3. Make sure you’ll view the .md5 extension of the files. If you see only .tar, click on the View tab on the Windows Explorer window and check the choice that says ‘File name extensions‘.
  4. Now, right-click on the firmware file that starts with AP in its name and choose the rename option and add a .zip extension after .md5.
  5. Then select the BL file and alter its extension to .zip too
  6. You can now extract the AP and BL zip files.
  7. Open the AP folder, copy the boot.img.lz4, and system.img.lz4 files and paste them during a new folder.
  8. Similarly, open the BL folder and move the file names sboot.img.lz4 to an equivalent new folder.
  9. Open the folder where you saved the boot.img,lz4, sboot.img.lz4, and system.img.lz4 files. Select all three files and zip them into one file by
  10. selecting the Compress to “New folder.zip” option from the Windows context menu
  11. Now, change the Zip extension of latest folder.zip file to .tar and rename it with the firmware name as shown below.
    You have successfully created the Samsung combination file to get rid of FRP on your Galaxy device.

Samsung G935F Combination File U5

3. Reset Samsung Device and Enable USB Debugging
Before you proceed to put in the mixture file, you would like to perform a knowledge factory reset. Since you can’t do this via the device settings of your Samsung Galaxy phone or Tab, you would like to try to to that via the Recovery Mode. the tactic to access the Recovery mode on Samsung devices differs from model to model. you’ll ask my detailed tutorial on booting into the Samsung Recovery Mode.

  1. Once you get into the Android Recovery menu screen, select the Wipe data/factory reset. you’ll use the quantity up/down keys to navigate and therefore the Power button to verify the choice .
  2. Perform a data/factory reset then select the Reboot system now option.
  3. When your Samsung device boots up, you’ll see the Samsung factory binary screen almost like one like shown below. Tap the mosaic icon on the top-left corner of the screen.
  4. Doing so will show you the app drawer screen. Navigate to Settings > Developer options and enable USB debugging. If you don’t find that
  5. option, here is how you’ll activate the Developer option on Samsung devices.
  6. Now, close up your phone or tablet device by holding the facility button.
    Flash Samsung Combination File with Odin
    Okay, you now have the Samsung combination file that you simply created from the stock firmware. you’ve got also enabled USB debugging on your Galaxy device to make sure that Odin can it. you’re ready to get rid of the FRP lock on your Samsung phone or Tab.

Samsung G935F Combination File U5

Download the patched version of Odin and extract the Zip file on your desktop.

  1. Odin3 3.14.1 3B PatcheD (for devices released after 2018)
    Odin3 3.13.3 3B PatcheD (for older Samsung models)
  2. Download and install the newest Samsung USB Driver on your Windows PC and reboot your system.
  3. Open the Odin folder and launch Odin3.exe as an administrator.
  4. It’s time else your Samsung device into the Download Mode
  5. Connect your device to the pc employing a compatible USB cable.
  6. When your phone or tablet is recognized by Odin, the ID:COM port are going to be highlighted.
  7. Click the choices tab in Odin and confirm that only the Auto Reboot and F. Reset Time options are enabled there.
  8. Then click on the AP button and add the Samsung combination file you created earlier.
  9. Finally, click the beginning button to trigger the installation.
  10. Wait until the mixture firmware installation finishes and you’re greeted by the PASS!! message in Odin. Your Samsung Galaxy device will reboot automatically.
  11. Just wait until your device boots up and that’s it. you’ve got successfully removed FRP lock on your Samsung Galaxy smartphone.
    Please get the approval to use factory binary (PIT)
    Sometimes, Samsung’s security feature might block the installation of custom firmware and throw the subsequent error on the Download Mode screen of your Samsung Galaxy device.
    To fix this, you’ll flash Hell (Partition Information Table) file for your device along side the Samsung combination enter Odin. If you don’t skills to urge the right PIT file, read my tutorial describing the steps to extract Samsung PIT from firmware.

Please confine mind that if you put in Hell file, you’ll need to check the Re-partition option under the choices tab in Odin also . Moreover, you’ll got to add Hell enter Odin by clicking Hell tab in Odin. If the Samsung combination file doesn’t assist you to get rid of the FRP lock, you ought to also try the NAND Erase method using Odin.

Samsung G935F Combination File U5

How To Flash

Follow these steps to enter Download Mode/Odin Mode

Power off your device
Press and hold Volume Down key, tonic key and Power Key
When your device vibrates, release Power key while keep holding the quantity Down key and residential key

download-mode-samsun

Samsung G935F Combination File U5

Warning before getting into download mode

In the initiative cut your phone by holding the facility key for a cpuple of seconds. Then press and hold together Volume Down + Bixby + Power button a few seconds.
After that, you ought to see a menu with two options. Finally, enter Download Mode by pressing Volume Up

download-mode-samsun

Samsung G935F Combination File U5

Connect your device to PC.

Your device should be automatically recognized by Odin. At the lower-left of the Odin interface, it should show a message that says “Included! “Added!” and within the meantime, you ought to see a light-blue box at the ID: COM section stating “COM:3” (the number depend upon which USB port you’ve got plugged the device cable and is irrelevant).

Samsung G935F Combination File U5

Click “PDA” or “AP” to feature the tar.md5 file that you “Start”.

Whether it’s “AP” depends on the version of Odin that you simply used. But the md5 file goes to either “AP”.

odin

Samsung G935F Combination File U5

Add *.md5 to Odin.

adding the file, click “Start” the flashing process.

Samsung G935F Combination File U5

Click “Start” to flash

DO NOT REMOVE OR operate YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.

Samsung G935F Combination File U5

Ongoing flashing process. don’t remove your device.

When the flashing process is completed, you ought to see an enormous green box saying “RESET” or “PASSED” (depends on the version of Odin is used). By now, the device should be rebooted and it’s safe to remove/unplug your device.

A2zflashfile.com

Samsung G935F Combination File U5

Flash succeeded. 

Samsung G935F Combination File U5

Samsung G935F Combination File U5
COMBINATION_FA60_G935FXXU5ASD2
Download Link:: Link

 

About the author

Khateeb Alam

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

x