Nokia 225 RM-1043 Flash File
RM-1043_ROM_eMP_20.10.11
All Nokia Flash File
How To Flash
Flashing ( Firmware Update and repair )
1. Normal (normal / test / local mode)
2. DEAD
Select Files – manual and automatic – if the complete package installed firmware.
S40:
You can sew the subsequent combinations of files:
• MCU
• MCU + PPM
• MCU + CNT
• MCU + PPM + CNT
For a successful firmware in DEAD mode.
1. Choose the right version of the firmware files (RM for automatic mode)
2. Mark DEAD MODE, select the choices and post-flash action.
3. Press FLASH and after – to attach your phone and press the facility button briefly.
-> Some phones just got to hook up with the cable (7900 and similar)
4. Wait until flashing complete
Download and Extract Device Flash File using WinRar or 7Zip.
Power of Mobile and take away the battery if removable
Open Infinity Best NK2 Box / Dongle Setup.
Select Load Tab from Tool and choose downloaded VPL file
Connect Mobile with Computer via USB data cable
Click on Write FW Tab from NK2 Best Dongle for start the method
Take a flash and don,t unplug device under the flashing process
The flash File write process is completed during a jiffy
An OK Message will appear on Tool or device screen
Congratulations on Flash File Firmware installed successfully.
Power ON Device and you’ve got done it.
Note: Please make a copy of your device before install or update Flashing File.
RM-1043_ROM_eMP_20.10.11.rar
Nokia 225 RM-1043 Flash File
Download Link:: Link 1:: Link 2:: Link 3
