If you are looking for the best 100% working SPD flash tool download links, you are in the right place. In this website, you will get the Spreadtrum flash tools to download links. Also, flash tools are the latest version. In fact, you can use these flash tools on any Spreadtrum based Android phones. And all the download links are checked and verified. Also, these are all direct download links. So, you just have to click on the download link and the Spreadtrum flash tools will start download automatically. In the next section, I will discuss how to use SPD flash tools. Things You Need
Now before using the Spreadtrum flash tools, you need several things. And they are as follows. 1. You need a desktop computer with a Windows operating system. And the preferable OS is Windows 7. Besides you can also use Windows XP, Windows Vista, Windows 8/8.1 or Windows 10. 2. Then you need PAC files to be flash which is your device firmware. 3. And you need Spreadtrum driver software. 4. Then you need Spreadtrum flash tools. So, at first download the flash tool from the download section. Now you are ready to flash SPD Android device. And here I am going to explain the flashing process step by step.
Model: QMobile X36. [*] Chipset: Spreadtru [*] Driver: SPD SCI Android USB Driver. [*] Flash Tool: SPD Upgrade Tool.
How To Flash QMobile X36 Firmware
Step 1: Download and extract the QMobile X36 flash file on your computer. After that, you will find .pac Firmware inside the folder. Now open SPD Flash Tool and click on the Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on the Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.