Samsung SAM J120F FRP Unlock ADB Enable File
How To Remove Samsung J120F Frp Tutorial
1 step = Download Frp remove adb Enable file [ Sboot ]
2 step = Extract to this Folder [ frp file ]
3 step = Download odin flash tool
4 step = Extract to this Folder [ odin ]
5 step = open odin
6 step = now select ” PDA”
7 step = Select Frp removeal file [ sboot ]
8 step = install SAMSUNG USB Driver for Mobile Phones
9 step = Phone must be download mode
10 step = Usb Cable connect in your phone
11 step =show odin typing added
12 step = Select Start
13 step = flasing done reset your phone
14 step = wait few minit
15 step = Use Z3X Box/Nspro/ocktopus/ocktoplus/frp removal tool
reset frp
How to Use Samsung ADB Enable Files:
- Download the relevant USB driver for your Samsung device.
- Download the flash tool Odin on your phone.
- Now, download the relevant ADB Enable File for your device.
- Open the Odin software then choose ADB Enable File in “AP” from the Box.
- Turn on USB debugging mode on your phone.
- Now, connect your mobile and computer with a USB cable.
- Open the ADB Enable tool and click on start. After that, your device will start rebooting.
- Disconnect the USB cable.
- Select language English when your phone turns on. After that, click next.
- Now turn on Wi-Fi or mobile data.
- After that, agree on the agreements and click on next. They will ask you to verify your account.
- Now, connect your mobile and PC again. Then open the GSM Flasher.
- You will see some information about your mobile phone and operating system.
- Click on remove FRP. The lock will be removed at a short time.
- Congratulations, you have successfully bypassed the FRP lock.
Samsung SAM J120F FRP Unlock ADB Enable File
Samsung SAM J120F FRP Unlock ADB Enable File |
J120F Enable ADB |
Download Link :: Link |