Hotwav Cosmos V6 Plus Flash File Stock

Firmware ROM

Hotwav_Cosmos_V6_Plus_S7358_5.1_SPD

HOTWAV COSMOS V6 PLUS Flash File Firmware

How To Flash HOTWAV COSMOS V6 PLUS

Step 1: Download and extract HOTWAV COSMOS V6 PLUS flash file on your computer. After that, you will find.PAC Firmware inside the folder. Now open SPD Flash Tool and click on the Load Packet button in Flash Tool then select the .pac Firmware file.

Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on the Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.

Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.

HOTWAV COSMOS S8 Flash File Firmware

Link

HOTWAV COSMOS C5 Flash File Firmware

Link

HOTWAV COSMOS V2 Flash File Firmware
Link
HOTWAV COSMOS V4 Flash File Firmware
Link
HOTWAV COSMOS V5 Flash File Firmware
Link
HOTWAV COSMOS V6 Flash File Firmware
Link