1: Download and extract the Hotwav Venus R10 stock firmware package on your Gain M computer. Step 2 After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide. Step 3 Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step). Step 4 Follow the How-to Flash Manual to Flash the Firmware on your Hotwav Venus R10 Device Follow Detailed Guidelines Readme Once
How To Flash Hotwav Venus R10 Stock Firmware ROM Flash File
Step 1: Download and extract Hotwav Venus R10 Stock Firmware ROM Flash File on your computer. After that, you will find.PAC Firmware inside the folder. Now open SPD Flash Tool and click on the Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on the Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.