Samsung A205F Combination File U9

Samsung A205F Combination File U9

Samsung A205F Combination File U9

Samsung A205F Combination File U9


All Firmware Samsung For All Series

COMBINATION A-SERIES

SAMSUNG_COMBINATION Product SW KNOX Product SW


How To Flash

Follow these steps to install Download / Odin Mode

Turn off your device
Press and hold the Volume Down key, tonic key, and power key
If your device vibrates, release the Power key while holding the Down key and the location key

Samsung A205F Combination File U9

Warning before entering download mode

First, cut your phone by holding the local key for a few seconds. Then press and hold the Volume Down + Bixby + Power button for a few seconds.
Next, you should see a menu with two options. Finally, enter Download Mode by pressing Volume Up

Samsung A205F Combination File U9

Connect your device to your PC.

Your device should be automatically recognized by Odin. At the lower-left of the Odin interface, it should show a message that says “Included!“Added!” and within the meantime, you ought to see a light-blue box at the ID: COM section stating “COM:3” (the number depends upon which USB port you’ve got plugged the device cable and is irrelevant).

Samsung A205F Combination File U9

Click “PDA” or “AP” to feature the tar.md5 file that you “Start”.

Whether it’s “AP” depends on the version of Odin that you simply used. But the md5 file goes to either “AP”.

Samsung A205F Combination File U9

Add *.md5 to Odin.

adding the file, click “Start” the flashing process.

Samsung A205F Combination File U9

Click “Start” to flash

DO NOT REMOVE OR operate YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.

Samsung A205F Combination File U9

Ongoing flashing process. don’t remove your device.

When the flashing process is completed, you ought to see an enormous green box saying “RESET” or “PASSED” (depends on the version of Odin is used). By now, the device should be rebooted and it’s safe to remove/unplug your device.

Samsung A205F Combination File U9

Flash succeeded.

  • Odin Download for Samsung Stock Rom Flash
Odin is one of the most popular tools for flashing custom ROMs. It has native support for Samsung phones, but it is not difficult to add third-party support too. We will show you how to use Odin Download for Samsung Stock Rom Flash.
In this post, I’ll walk you through the steps required to flash a custom ROM on your Samsung Galaxy S8 running on Android 8.0 Oreo. What you need: • An unlocked Galaxy S8 • Odin Download for Samsung Stock Rom Flash v2.10 [for S9/S9+] • A PC or Mac running Windows 7, Windows 8.1, or newer (64 or 32-bit) • CWM or TWRP recovery image of your choice (e.g., SuperSu) • A USB cable to connect your phone to the PC Odin Download for Samsung Stock Rom Flash v2.10 How To Use: 1) Extract Odin to your computer 2) Run Odin 3) Make sure that “Auto Reboot” is disabled 4) Select the target device 5) Click on Start Scan 6) When complete, click on PDA 7) Select Rooting and confirm 8) Click on PDA 9) Confirm your changes and click OK 10) You should now see a message saying ‘Connecting…’ 11) Once connected, select Fastboot from Tools menu 12) Click on Start 13). Follow the prompts you get to flash the ROM 14). Once finished, reboot into TWRP 15). During the flashing process, double-check all data integrity is good 16). After flashing has been completed successfully press Volume Down + Home + Power buttons simultaneously until you see an Android logo 17). Wait until it boots up 18). After rebooted successfully hit the Volume Up + Power button at the same time 19). Go into Settings > About phone > System > Reset 20). Now reboot back into stock Android 21). The application will automatically restart 22). You can now enjoy your new custom ROM 23). The procedure above works with any phone running Android 8.0 Oreo 24]. If you have other questions feel free to ask in the comments below 25].
  • How to Use Odin Download for Samsung Stock Rom Flash
Odin Download is a tool that allows you to flash custom Samsung firmware onto your Samsung Galaxy device. If you want to flash stock Samsung firmware, but don’t want to use Odin and sideload it, then Odin is the way to go.
The app itself is free and simple to use, but users should be aware that it only works for the bootloader version of Samsung devices and not for OTA updates (if there are any). Odin does not do anything with OTA builds or custom recovery configurations. You must have a Samsung-made bootloader (BEB) installed on your device in order for Odin to work properly.
  • How to Backup Your Bootloader, Modem, and EFS Using Odin Download for Samsung Stock Rom Flash
I have just published Odin Download for Samsung Stock Rom Flash, a tutorial on how to flash a stock ROM on your Samsung Galaxy S7 Edge smartphone using Odin. The tutorial assumes that you have downloaded the latest Odin Download for Samsung Stock ROM and installed it on your iPhone or Android device.
The tutorial covers Odin and the Samsung Galaxy S7 Edge smartphone. I will be covering the use of Odin and flashing stock ROMs. The tutorial is not meant to be an exhaustive guide on flashing stock ROMs, but only a very basic guide in using Odin to install the latest Stock ROM on your phone.
  • How to Restore a Nandroid Backup Using Odin Download for Samsung Stock Rom Flash
Odin Download is a wonderful tool, and an indispensable one, if you are going to root your phone. It allows you to flash Samsung’s stock ROMs and it also allows you to use Odin (the tool used to perform the flashing) as a file manager.
After rooting your device you will need to flash stock ROMs using Odin. First, though, you need to make sure that you have rooted your device and flashed the ROM in question. If you have not done so yet, follow these steps:
• Press “Volume Down + Power” until the “Wake Up” screen appears
• Choose “Reboot System” from the menu
If you have already rooted your device but have not flashed the ROM yet, follow these steps:
• Deselect all of your pre-rooted devices in Odin (if any)
• Connect all of your pre-rooted devices in Odin – if necessary – until the first time that “Connecting…” appears
Then select all of those devices except for one. That one should be the device on which you would like to flash the ROM. Choose that one in Odin and press “Flashing..” until a box appears asking if this is OK; then select Yes. This will flash everything on that device except for that one selected item. Do not remove this item from Odin (you can just re-select it). Then select Flashing… once again and choose YES once more (this will flash the selected item on this device only). This process continues until all items are flashed on that one selected device: Samsung Galaxy S9+. If there are more than two selected items, repeat steps 5-7 until all of them are flashing in Odin – then select Yes once more (this will flash everything else on this device only). Once done go back into Odin and select Flashing… Once again choose YES once more (this will flash everything else on this device only). After that, no further Odin steps need to be performed on this particular target device so long as it stays unrooted. You may now disconnect from all other connected devices by choosing Restore from here. If any problems arise during this process ensure that they do not affect your choice of the target device or anything else along those lines – if so proceed with restored phone setup. At which point, you can disconnect from all other connected devices… or continue with the normal setup.
Samsung A205F Combination File U9
COMBINATION_FAC_FA90_A205FDDU9ATI1
Download Link:: Link

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

x
error: Content is protected !!