TECNO Spark 5 Pro KD7 FRP File (With DA) Unlock by SP Tool [Fix Boot Recovery Mode]
About TECNO Spark 5 Pro KD7
Tecno Spark 5 Pro mobile was launched on 13th July 2020. The phone comes with a 6.60-inch touchscreen display with a resolution of 720×1600 pixels and an aspect ratio of 20:9. Tecno Spark 5 Pro is powered by an octa-core MediaTek Helio A25 processor. It comes with 4GB of RAM. The Tecno Spark 5 Pro runs Android 10 and is powered by a 5000mAh non-removable battery.
As far as the cameras are concerned, the Tecno Spark 5 Pro on the rear packs a 16-megapixel primary camera with an f/f/1.8 aperture; a 2-megapixel camera; a 2-megapixel camera, and an AI camera. It sports an 8-megapixel camera on the front for selfies with an f/f/2.0 aperture.
The Tecno Spark 5 Pro runs HiOS is based on Android 10 and packs 64GB of inbuilt storage. The Tecno Spark 5 Pro measures 164.70 x 76.30 x 8.75mm (height x width x thickness) . It was launched in Ice Jadeite, Cloud White, Spark Orange, and Seabed Blue colors.
Connectivity options on the Tecno Spark 5 Pro include Wi-Fi, GPS, USB OTG, and FM radio. Sensors on the phone include a fingerprint sensor. The Tecno Spark 5 Pro supports face unlock.
As of 7th November 2021, Tecno Spark 5 Pro price in India starts at Rs. 10,999.
Download TECNO Spark 5 Pro KD7 FRP Unlock File
You can easily download TECNO Spark 5 Pro KD7 FRP unlock File for Android 10 free with no password from here. It is exclusively available only for all bypassfrpfiles.com visitors.
How to Bypass FRP TECNO Spark 5 Pro KD7 with SP Flash Tool
- Download & extract TECNO Spark 5 Pro KD7 FRP Unlock file to your computer.
- Open the Flash tool folder
- Run SP Flash tool.exe
- Click on Choose from Download-Agent file Tab and select the MTK_All_IN_ONE_DA.bin file from the FRP folder.
- Tap Open
- Click on Choose from Scatter-Loading File Tab and select the scatter.txt file from the Tecno Spark 5 FRP folder.
- Tap Open
- Now Untick the Preloader Partition
- Goto Format => Select Manual Format Flash
- Copy and Paste the below FRP Address into the SP flash tool
- FRP Address
BEGIN ADDRESS: 0x1888000
FORMAT LENGTH: 0x100000
- Run MCT MTK Bypass Tool to your computer
- Now Power Off your Vivo Y20G phone.
- Connect your device to computer via USB cable
- Click on BYPASS in the MCT MTK Bypass Tool.
- Open Device Manager => Check the COMPORT Number
- Select the COMPORT number (In my case I have COM9)
- Click START
- The unlocking process will begin
- It will take some time to finish
- Once finished, disconnect and Power On your TECNO Spark 5 Pro KD7
- Setup all initial steps.
- That’s it.